Many home owners do not know how to clean carpet, while some are busy looking for the best ways to deep clean their carpets, others are looking for easy means to remove spot stains from their carpets. However, there is one thing we all have in common, and that is; we all want a healthy and clean looking home.
If only there was a way to keep our carpets clean forever and free of dirt’s, life would have been much easier obviously.
Sadly, there isn’t.
Even though having a clean looking carpet is important both for the appearance of your home and the health of the people who lives in it,
every home is prone to the occasional coffee spill, pet or shoe stain, but how you deal with the stain afterwards is what matters.
Dirty and stained carpeting won’t improve the looks of your home, nor will it help with your resale value or getting your security deposit returned.
That’s why it’s important to know how to clean carpet properly, with methods for vacuuming, carpet deep cleaning, stain and odor removal.
How Often Should You Clean Your Carpet?
For routine maintenance, you should clean and vacuum high-traffic areas once or twice a week to remove daily dirt and debris if you live in an active home, and have your carpets professionally cleaned twice a year. For high-traffic households with pets, playful children, or smokers, we recommend cleaning your carpets anywhere between three and seven times a week, and professionally cleaned three to four times per year depending on how soiled the area is.
TIP: Read the carpet manufacturers warranty and cleaning guide to keep you on the safe side.
Which carpet cleaning method should you use?
Cleaning Process (in detail)
Vacuuming and Steam Cleaning
While vacuuming first takes out all of the dirt from your carpet, steaming or steam cleaning completely removes stains and deep cleans your carpet for an even cleaner and healthier look.
Highly Recommended for all rounder carpet cleaning.
To clean your carpets properly, start by vacuuming them to pick up most all dirt. Then, spot clean stains using a carpet cleaner and a white cloth to prevent cloth color from transferring onto the carpet. But if you do not have a carpet cleaner, use hydrogen peroxide or diluted white vinegar instead.
The first line of defense in cleaning carpet is vacuuming first. Using a good vacuum cleaner, Do this slowly and thoroughly (multiple passes) using a vacuum with clean bags and filters.
Dry soil that is not removed eventually turns to mud, and can impair the performance of even the best carpet cleaners.
A Properly cleaned and maintained carpet will last twice as long. Here is a detailed step by step guide on how to clean your carpet professionally:
Step 1: Test For Color Fastness
Before you go all into cleaning and vacuuming your carpet, it only makes sense to first test and see how your carpet color reacts to the cleaning material you are about to use, so as to prevent it from looking old and worn out.
First, find a part of the carpet that is not so visible, it could be a piece or carpet inside a closet.
Dampen a cloth (white cloth recommended) with the cleaner or stain remover you want to use.
Lay the cloth on the carpet for up to one hour, and then blot the damp area with a dry white cloth.
If the cloth is stained with carpet dyes, test other carpet cleaning products until you find one that does not make the carpet sample bleed.
Step 2: Prepare the Room to be Cleaned, Vacuumed or Shampooed
Whether you want to vacuum clean your carpet, perform a spot cleaning on the affected surface or use a shampoo to clean your carpet, we recommend you always protect your furniture, carpet padding, and sub floor when cleaning carpets.
Find a partner to help you move obstructive furniture from the room or space where the carpet is being cleaned. You can also do this yourself, if you are able to move them yourself.
Vacuum Cleaning the carpet
This process helps you completely remove all forms of dirt from your carpet or rug.
Pick up any toys, papers or other objects that will obstruct the free passage of the vacuum cleaner.
Check for small metallic items such as coins, spoons or needles that might damage the mechanism. Do not forget to also look under furniture.
For effective cleaning, dust the blinds, curtains, furniture, windowsills, and baseboards first. Doing this will help vacuum the the falling dust as well.
Though carpet spot cleaning isn’t considered to be a routine carpet cleaning process, because over time spot cleaning just doesn’t do it. You turn around one day and your carpets are a shade darker than when you had them installed.
Spray the detergent solution onto an absorbent cloth (not the carpet — you don’t want to wet it too much), and dab (don’t rub!) it on the spot. As the stain dissolves, blot with a clean section of cloth. Keep applying and blotting this way until the stain is gone.
Step 3: Pay attention to deep stains and treat them specially
Mix 1/4 cup salt, 1/4 cup borax and 1/4 cup vinegar, then apply this paste to deep stains or heavily soiled sections of carpet. Allow the paste to sit on the carpet for several hours until it dries completely, then vacuum it away.
Spray the stain with some foam shaving cream (the forming type) and allow to sit for 30 minutes or more. Now, blot it with a clean white cloth and then vacuum. This solution works on a wide range of stain types, including grease.
Step 4: Start up the Carpet Steam Cleaner for deep cleaning
Having done other things up till this extent, all you have to do now is start up the carpet steam cleaner.
If your carpet happens to be the soiled type of carpeting, you can add 1 cup white vinegar to about 2.5 gallons of water for very deep carpet cleaning.
The reason I always choose to go with steam cleaning is because, it is safe for people living with allergies.
Caution: When using a steam cleaner, do not get the carpets overly wet. Over-wetting can damage the carpet backing and underlay, causing shrinkage, discoloration, and odor.
Step 5: Allow Carpet to dry Completely
After deep cleaning your carpet, Open up the windows and allow air to pass freely. You can also turn on the fan if you have one.
While the carpet is drying, do not walk inside or allow anyone to go in, as this can make your cleaning effort go to waste, since dirt’s could easily enter into the carpet in its wet state.
Once they are mostly dry you can bring your furniture back in, usually, we recommend you put aluminum foil under the legs to avoid any stain bleeding onto the wet carpets.
Doing Carpet Cleaning by Hand
If for any reason whatsoever, you aren’t able to perform a good steam cleaning on your carpet, there are other ways to still get your carpets clean and smell fresh, doing just a few little things with your hands, and some carpet cleaning solutions to help as well.
Homemade DIY Carpet cleaning solution
Mix ¼ cup of white vinegar with warm water in a bucket.
How to clean a carpet by hand
To start, fill the bucket with warm water and ¼ cup of white vinegar. Then take the scrub brush and dip it into the bucket. Now carefully start to scrub the carpet with the cleaning solution you mixed.
You might want enough of the mixture on the scrub brush to get the carpet a little wet, but not saturated.
Once you’ve scrubbed the carpet, empty the bucket and fill it with fresh water. Now, dip a white cloth into the bucket, bring it out and gently start to scrub the carpet again. After you’ve made a second pass over the carpet, let it dry thoroughly.
To help speed the drying process along, you can turn on a floor fan.
Do not forget that regular vacuuming and stain-removal products can help, but they simply can’t match the cleaning power of professional carpet cleaning. if you need to get professional carpet cleaning services, we are here to help match you with the best local carpet cleaning specialist near you. Contact us today.
Hope you found this carpet cleaning guide on how to clean your carpets in five (5) easy steps useful enough to help you get a well cleaned carpet. Feel free to use the comment box to interact with this tutorial.